Bathroom tiles are a very significant aspect of bathroom remodeling. They are not only essential part of the floors and walls, but are also necessary part of the entire bathroom design. Modernizing your bathroom brings a change and reflects your style and environs of it comfort. However, renovating your bathroom by yourself can be an intimidating chore especially if you are not familiar with the task. When handling a remodeling task alone, the hardest thing is installing bathroom tiles. However, do not worry, Fineline Kitchen and Bath offers great tips on how to install tiles without a headache.
When installing bathroom tiles, you need to find the following materials. A tile cutter, spacers and tiles, a tape measure, spreader, a pencil, grout, level, sponge, goggles and some gauntlets. After you have all these materials, then you are ready, and then follow these steps so you can install a bathroom tile.
Mark the installation area
Before you begin to fix a bathroom tiles, it is vital that you check the area. Clear and clean all surfaces. It is good to remove previous tiles and wallpapers before starting. This is to prevent tiles from coming off while you install it.
Test on How the Tiles Will Suit
In this step, the assumption is, you have a correct quantity of tiles in your materials. After you have swept and cleaned the area, try to suit in the tiles, and see in what manner they fit. You will get the idea of how they will look once you are finish. Make sure to have a tape measure at hand so you record the inches on how you should cut your tiles at the sides. This is crucial for the next step.
In this step, you will cut the tiles according to your measurements. Installing bathroom tiles requires one to be precise on, measurement. Make sure you double-check your measurements. Here Accuracy is very essential. The fact is you do not want clumsily cut tiles decorating your bathroom. If you are not sure that you have what it takes to cut bathroom tiles, then you can seek help from people for help. It is also better to ask someone else to cut the tiles for you if you are not confident.
Begin Fixing the Bathroom Tiles then Wait.
If you were able to get past the prior step, now it is the time to fix the tiles. As you have laid down the tiles from step two, start setting in some spacers. Now lift the tile and lay some adhesive on the floor or surface. Set the bathroom tile on top of the glue and then use your sponge to remove the excess. Do this to cover the entire area that fit tile. After you are done, leave the field for a whole night to let the adhesive set.
Fill In the Gaps
After you install, you can now to add the grout. Use gloves to mix the grout according to the directions given. To start, begin eliminating the spacers and spreading the grout in mid. You will have to be careful so that you do not make a mess. Remember installing bathroom tiles requires responsiveness. Gaps can destroy then entire design.
Conclusion
In conclusion, the above is everything you need to know on installing bathroom tiles on a remodeling project. However, if you are not sure about your skill, you should get a professional. Just like in kitchen conversion, you should always follow your heart. Nevertheless, if you are sure, you should go ahead and do it yourself.
